Because the ultrasonic energy of laboratory cleaning machines can penetrate the inner walls and fine gaps, small holes, and blind spots of glassware, different frames can be equipped to clean glassware, test tubes, beakers, glass slides, cover slips, glass straws, culture dishes, triangular flasks, pipettes, and other laboratory utensils. When the cleaned items are fine glassware, components, or assemblies, laboratory cleaning machines often become the preferred cleaning method that meets their specific technical requirements.

The factors determining the ultrasonic cleaning time of laboratory ultrasonic cleaning machine

1. Ultrasonic power level. The higher the ultrasonic power, the shorter the cleaning time naturally. Generally, jewelry, necklaces, and bracelets can be cleaned in 3-5 minutes. If it is used to wash hardware parts and car parts in the factory, it usually takes 15-30 minutes. If oil or rust remover is added, the cleaning time can be shortened by 20 minutes. In special circumstances, if the ultrasonic power is too low, it is impossible to clean thoroughly, and it is not a problem with the cleaning time.

2. High and low ultrasonic frequencies. The ultrasonic cleaning machines produced by Jiemeng are mainly 28KHz or 40KHz, which can be selected according to customer needs. Generally, the higher the ultrasonic frequency, the cleaner the cleaning. In industry, heavy oil stains and rust spots are often removed, and industrial ultrasonic cleaning machines take longer to remove oil and rust, but the cleaning time can be adjusted.

3. Cleaning agents also have an impact on the duration of cleaning. Cleaning agents generally include degreasers, rust removers, degreasing powders, rust removers, wax removers, rosin removers, etc. Different cleaning agents are selected for different objects, mainly to perform chemical cleaning, while ultrasonic cleaning machines themselves perform physical cleaning.

4. The cleanliness of the object itself. This is an essential factor that cannot be ignored, such as thick dust, impurities, heavy oil stains, rust spots, messy structure of the object, numerous fine seams and bumps, and longer cleaning time.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/