The working principle of traditional cleaning machines is to use the rotational action of the body to create a conflict between clothing and water flow, removing stains from the clothing. However, the conflict of water flow is limited and cannot satisfy many large cleaning units, so the waterless ultrasonic cleaning machine using the principle of physics ultrasonic waves was born.

Anhydrous ultrasonic cleaning machine - for ultrasonic or heating operations

Never mind! It is necessary to definitely prevent the ultrasonic cleaning machine from connecting to the power supply and performing ultrasonic or heating operations without water in the cleaning tank. It is necessary for the cleaning solution in the cleaning tank to reach the scale line inside the tank. If the liquid level is more than one centimeter below the scale line, it will cause uneven heating of the cleaning tank, resulting in damage to fuses or circuit boards. The resulting instrument hazards will void the warranty of the cleaning machine.

It is strictly prohibited to turn on the ultrasonic cleaning tank without water to avoid damaging the machine. It is necessary to turn off the power when placing/changing the cleaning solution. Stop using highly corrosive and flammable solutions as cleaning agents to avoid container corrosion and the risk of recurrence.

The casing needs to be well grounded and secure. Under normal circumstances, the cleaning machine will automatically heat up after 10-15 minutes of continuous operation. If using heating method for cleaning, the temperature should not exceed 70 ℃, and the ambient temperature should not exceed 45 ℃. It is strictly prohibited to dismantle or install cleaning machines with electricity to prevent electric shock!!

Anhydrous ultrasonic cleaning machine - using the lowest pressure for operation

Always use the lowest possible pressure to complete the task, but this pressure should be sufficient to complete the task. Before disconnecting the hose connection, always release the pressure inside the cleaning machine first. Always drain the water from the hose after each use. When the spray gun is not in use, it is always necessary to set the trigger to a safe and certain state.

Never start the equipment until all hose connections have been confirmed in place. Never start the equipment until the supply water is connected and an appropriate amount of water flows through the spray gun barrel. Then connect the required cleaning nozzle to the spray gun rod.During the operation of the ultrasonic cleaning machine, it is advisable not to share the same power source with high-power machines. This can prevent the ultrasonic cleaning machine from burning out due to sudden stoppage of the high-power machine and high voltage, which may cause instrument damage and void the warranty of the cleaning machine. If the user's voltage is unstable, it is necessary to equip a stable power supply with sufficient capacity.

Anhydrous ultrasonic cleaning machine - using clean water or aqueous solution as the cleaning agent

Ultrasonic cleaning machines should promptly use clean water or aqueous solutions as cleaning agents, and the use of alcohol, gasoline, or any flammable gases as cleaning agents in the cleaning machine should be strictly prohibited. This situation may lead to phenomena such as fires and explosions. Or the instrument hazards may render the warranty of the cleaning machine invalid. Moreover, acidic cleaning agents such as sulfuric acid and hydrochloric acid, as well as corrosive liquids such as hypochlorous acid, should not be used, as this will pose a risk to the stainless steel cleaning tank!

The object or container being cleaned should not directly touch the lower part of the cleaning tank. A mesh basket can be placed in the cleaning solution, otherwise it will cause uneven force on the transducer at the bottom of the cleaning machine and damage it. The resulting instrument hazard will render the cleaning machine warranty invalid. Another point to note is that during the operation of the ultrasonic cleaning machine, do not put your fingers into the cleaning tank, as it may cause pain or discomfort.

When operating the ultrasonic cleaning machine: Always wear appropriate goggles, gloves, and a mask. Always keep hands and feet away from the cleaning nozzle. Always check all electrical connectors. Regularly inspect all liquids. Regularly check the hose for cracks and leaks. Never aim the spray gun at yourself or others.

Due to the unique working principle of the waterless ultrasonic cleaning machine, it is not suitable for home use. Therefore, in the industrial field, operators are often fully armed, and the cleaning nozzle and wiring head need to be carefully inspected. In addition, all kinds of waterless ultrasonic cleaning machine laundry liquids need to be strictly controlled in order to avoid accidents.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/