Operating procedures for ultrasonic cleaning machine:

1. It is necessary for the operator of the ultrasonic cleaning machine to receive training, master the equipment functions and operating techniques before they can start working.

2. The cleaning machine should be placed in a clean, dry, and non corrosive gas and environment, and avoid severe shaking.

Before starting up, check whether the power supply, switches, indicator lights, gauges, protective covers, etc. are normal, whether the machine has any leakage, and ensure that all cleaning tanks are clean.

Do not turn on the machine when there is no cleaning solution in the cleaning tank to avoid damaging the ultrasonic system.

5. There should be sufficient heat dissipation space on the back of the generator.

6. Ensure that the machine has good grounding to avoid personal injury incidents.

7. Put in cleaning solution and workpiece, and close the protective cover. Set cleaning parameters such as temperature, time, and current, turn on the operation power, and check if the ultrasonic operation is normal.

8. The workpiece should be placed in a cleaning basket for cleaning, avoiding direct placement at the bottom of the groove to avoid affecting the cleaning effect.

9. Place the cleaned products neatly and orderly into the turnover tray. Avoid scratching the surface of the workpiece during loading, unloading, and cleaning processes.

If there are any abnormal phenomena during the cleaning process, the machine should be stopped immediately for inspection. After troubleshooting, normal production can be carried out.

11. It is necessary to regularly replace the cleaning solution to ensure that the cleaned product meets the process requirements.

If water leakage is found in the cleaning tank, it should be immediately shut down and stopped, and the cleaning solution should be emptied before contacting the seller.

13. Unauthorized disassembly of the machine is not allowed.

After cleaning, it is necessary to cut off the power supply to avoid accidents. Clean the dirt on the equipment to ensure the cleanliness of the machine. Make a good record of the inspection.

15. It is necessary to air cool the parts to room temperature before packaging.

16. The temperature of the cleaning solution will increase with continuous operation time, and the continuous operation time of the cleaning machine should not exceed 8 hours

After cleaning a cleaning machine with a heating device, it is necessary to turn off the heater and allow the cleaning solution to cool down before emptying the cleaning solution.

Smoking and open flames are prohibited around the ultrasonic cleaning machine, and flammable and explosive materials are not allowed to be stored. Fire prevention measures should be taken

Article source: Kaiping ultrasonic cleaning machine http://www.kpzfcsb.com/