In our daily lives, hydrocarbon ultrasonic cleaning machines have been widely used in various professions such as surface spraying, mechanical, electronic, medical, semiconductor, watch and jewelry, optics, and textile printing and dyeing. This demand has led to the need for protection and maintenance of hydrocarbon ultrasonic cleaning machines.

Carbon hydrogen ultrasonic cleaning machine - two ways of daily protection

Power supply: Use a power supply and power cord that meets the equipment standards. A dedicated air switch for the cleaning machine must be installed in the user's power circuit to cut off the cleaning machine power supply when needed; Be careful not to splash water into the electrical control box and related electrical components, and keep them away from water vapor, corrosive gases, dust, etc;

Grounding wire: The cleaning machine body and generator produced by our company are equipped with dedicated grounding wires on their power leads, which have distinct characteristics from other wires. Because this equipment comes into contact with water and corrosive (swelling) liquid levels, it is easy to cause leakage. Please connect the grounding wire according to safety requirements; Non flammable cleaning agents should be used for equipment, and flammable and explosive substances should not be used as cleaning agents. The use of equipment must be kept away from places where flammable and explosive substances are present. When users need to use certain substances in special circumstances, they must consult our company to confirm safety and take corresponding safety protection measures; The absence or lack of liquid level in the cleaning tank can cause irreversible damage to the equipment. When using, it is necessary to ensure that a sufficient amount of cleaning solution is injected into the tank, otherwise related electric heaters, pumps, and ultrasonic transducers may be damaged and may cause fire and personal injury.

Carbon hydrogen ultrasonic cleaning machine - attention should also be paid to the following situations when using the above two types

When the equipment is abnormal, please contact our company in a timely manner or have an experienced professional electrician inspect it after disconnecting the power supply; Please use a foot supported washing basket or hanging tool to hang the workpiece to be cleaned, and place it in the groove for cleaning. Do not directly place the workpiece at the bottom of the groove for cleaning, otherwise it may cause damage to the workpiece and cylinder bottom; During equipment operation, there may be factors such as high temperature, high voltage, live electrical component terminals on the outside of the body, movement of the transmission mechanism, sudden pressure changes, etc. that may cause personal injury. Do not open the casing during operation to avoid working without protection; When the equipment is not in use for a long time, please release the cleaning solution, dry the inner tank and outer surface, and protect them with a thin film to prevent accelerated corrosion and aging of the equipment; Adhering to ventilation, dryness, and cleanliness in equipment workplaces is beneficial for the long-term efficient operation of equipment and the optimization of working environment conditions; When the cleaning solution is too dirty, it should be dealt with in a timely manner, and the dust and dirt in the cleaning tank and storage tank should be cleaned regularly. Adhering to the cleanliness of the cleaning tank and its appearance can improve the durability of the cleaning tank;

Article source: Kaiping ultrasonic cleaning machine http://www.kpzfcsb.com/