Jiangmen Ultrasonic Cleaning Machine Analysis: What are the operating procedures of high-pressure cleaning machines

2020-03-16 1444

Before using the high-pressure cleaning machine, it is necessary to wear labor protection equipment (including goggles).

2. It is prohibited to point the cleaning gun at people, animals, electrical equipment, precision machinery, or high-pressure cleaning machine bodies.

3. It is prohibited to use high-pressure cleaning machines to wash clothes, shoes, transportation vehicles, and other operations unrelated to the job content.

4. The high-pressure cleaning machine is prohibited from being used by people to avoid the equipment being in an unmanned monitoring state.

5. It is forbidden to point the cleaning gun at harmful substances to avoid splashing harmful substances and injuring people.

6. It is prohibited to move the high-pressure cleaning machine during operation. It is necessary to move the high-pressure cleaning machine after the main power is cut off or the main switch on the control panel is switched to the "stop" position.

7. When using a high-pressure cleaning machine, it is necessary to ensure that the ground is dry and flat to prevent incorrect movement, tipping over of the high-pressure cleaning machine, and electric leakage causing injury. At the same time, it is necessary to ensure that the rotating wheel brake has been braked.

江门超声波清洗机

When using a high-pressure cleaning machine, it is necessary to tightly grip the high-pressure cleaning gun with both hands to prevent unsafe situations such as the cleaning gun slipping off or losing control due to the high-pressure recoil force during the operation and flushing of the cleaning gun.

When the high-pressure cleaning machine stops operating, it is necessary to switch the control panel to the "stop" position and disconnect the main power supply.

10. It is necessary to clean and protect the high-pressure cleaning machine after it has completely cooled down and the main power supply has been disconnected.

11. When cleaning, it is forbidden to use the safety knob on the cleaning gun to lock the cleaning gun in the open position.

12. When there is no water spraying from the cleaning gun, personnel are prohibited from approaching the cleaning gun for treatment.

It is necessary to slowly and gradually adjust the pressure setting or adjustment of the high-pressure cleaning machine after releasing the cleaning gun.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/