It is very important to clean hardware parts with a fully automatic ultrasonic cleaning machine, so it needs to be maintained regularly and maintained in the best condition. So, how should a fully automatic ultrasonic cleaning machine be maintained regularly?

1. Keep away from heat sources.

2. Prevent collision or severe vibration of the machine.

3. The machine should be stored in a damp environment.

4. Pay attention to sticking to the fully automatic ultrasonic cleaning machine for cleaning, and turn off the power when not in use.

5. The cleaning solution should be deposited, filtered or replaced in a timely manner to ensure the cleaning effect.

6. It is prohibited to splash conductive liquid (such as water) into the air inlet at the top of the ultrasonic control cabinet. Otherwise, it will cause serious harm to the circuit system of the fully automatic ultrasonic cleaning machine.

7. For machines that have been running for a long time, the power knob should be adjusted to zero before stopping, and the fan should be used to work for another 3-6 minutes before shutting down to ensure that the heat inside the power supply is dissipated.

8. The continuous working time of the machine should not exceed 4 hours. If the continuous working time is too long, the ultrasonic conditioning knob should be rotated to the position, and the cooling fan should continue to work. If the ultrasonic cleaning does not start, the ultrasonic control cabinet should continue to dissipate heat for at least 2 minutes.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/