Whether the ultrasonic cleaning machine works well or not actually reflects the function of the equipment itself. If you want the device to achieve its expected effect, there are also some local areas that require special attention.

What local factors should be considered first for the quality of ultrasonic cleaning machine operation

1. Check the temperature aspect

When the operating temperature of the ultrasonic cleaning machine is between 40-50 degrees Celsius, the cavitation effect can reach a good level. A higher temperature is beneficial for accelerating the dissolution rate of stains, but if it is too high, it can also affect the cavitation effect. Therefore, temperature stability is very helpful for the effectiveness of the cleaning equipment.

2. Check the frequency aspect

The lower the cleaning frequency of the ultrasonic cleaning machine, the better the cavitation effect. Assuming that the cleaning frequency is higher, the ultrasonic tortuous reflection effect is better. If you want a particularly good cleaning effect on surface stains, it is recommended to use low frequency for cleaning.

3. Check the power aspect

The higher the power of the ultrasonic cleaning machine, the better the cleaning effect and the faster the speed. For difficult to clean dirty workpieces, using high power for cleaning can save cleaning time. However, some precision instruments or special materials are not suitable for cleaning in this way. Pay attention to adjusting the power.

Overall, the performance of an ultrasonic cleaning machine depends primarily on the three aspects mentioned above. Of course, the cleaning time also has an impact on the entire cleaning process, and we need to pay attention to the corresponding operational requirements in practical application to ensure that the cleaning effect is achieved.

Article source: Kaiping ultrasonic cleaning machine http://www.kpzfcsb.com/