Ultrasonic waves are widely used in our daily lives. Ultrasonic cleaning utilizes the cavitation, acceleration, and direct flow effects of ultrasonic waves in liquids to directly and directly affect liquids and pollutants, causing the pollutant layer to disperse, emulsify, and peel off to achieve the purpose of cleaning. For the ultrasonic cleaning pure water equipment used in ultrasonic cleaning, there may be some problems during operation to varying degrees. One of them is the noise generated during the operation of ultrasonic cleaning pure water equipment. So, how to deal with excessive noise in ultrasonic cleaning pure water equipment?

1. Check if the original water pipeline is cut off, causing the booster pump to run idle, resulting in loud noise from the ultrasonic cleaning pure water equipment.

2. Check if the raw water is normal, and if it is supplied without a tower, if there is any gas in the water.

3. Check if there is a problem with the booster pump, such as excessive vibration, friction noise, etc.

4. Check if the pure water machine is securely placed.

5. Check if the water pipe is too long, as the pump's vibration causes the pipe to strike the casing.

6. Check if there is excessive noise caused by boiling hot water.

7. Check if the compressor is functioning properly.

I hope that when you find noise in ultrasonic cleaning pure water equipment, you must not ignore this issue. You should inspect the equipment to avoid affecting the operation of ultrasonic cleaning pure water equipment and thus affecting our work process.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/