In order to ensure the durability and high-speed operation of the ultrasonic cleaning machine, in addition to ensuring a suitable working and storage environment, it is also crucial to keep the equipment clean on time. This includes timely removal of dirt from the cleaning tank, storage tank, cleaning tank, and generator, cleaning of dust adhering to the electrical control box, and timely replacement of the cleaning solution to ensure cleaning effectiveness.

To achieve better efficiency of ultrasonic cleaning machine, it is necessary to ensure that the equipment operates at the appropriate voltage, and remember not to operate under high or low voltage power supply. And do not keep it in working condition for a long time, ensure the excellent timeliness of the equipment to prevent equipment failure or paralysis caused by excessive timeliness.

1. The power supply of ultrasonic cleaning machine and electric heater must have excellent grounding devices.

2. Do not start the ultrasonic cleaning machine when there is no water or solvent in the tank, as it may cause empty vibration and result in the vibration head being scrapped or damaged.

3. Cleaning equipment with a heating system should prevent turning on the heating switch when there is no liquid.

4. Stop hitting the bottom of the cleaning cylinder with heavy objects (iron parts) to prevent damage to the energy converter chip.

5. The bottom of the cleaning cylinder should be flushed regularly without excessive debris or dirt.

6. Do not put your fingers into the cleaning tank during the operation of the cleaning machine, otherwise you may feel a sharp pain or discomfort.

7. When changing the liquid each time, wait for the ultrasonic wave to start before washing the parts.

8. Use clean water or aqueous solutions as cleaning agents, and try not to use alcohol, gasoline, or any flammable gases as cleaning agents in the cleaning machine, which may cause simple fires, explosions, etc.

9. The best method to achieve the best ultrasonic cleaning effect is to set the temperature of the ultrasonic cleaning tank at 60-70 ℃, and select the appropriate cleaning agent according to different cleaning objects. Cleaning agents are generally divided into water-based (alkaline) cleaning agents, organic solvent cleaning agents, and chemical reaction cleaning agents. The most commonly used is water-based cleaning agents, and different cleaning times are selected based on the degree of contamination and nature of the dirt being cleaned.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/