1. If the surface of the laboratory ultrasonic cleaning machine is dirty, a semi moist cotton cloth can be used for scrubbing, but the equipment should not be directly washed with water. At the same time, it is also necessary to avoid the phenomenon of excessive cleaning solution overflowing during equipment operation, and to avoid water splashing into the oscillator, electric heater or electronic circuit board, which may cause problems.

2. It is necessary to regularly clean the dust and other attachments on the bottom of the ultrasonic cleaning machine cylinder and body in the laboratory. The stainless steel body of the cleaning machine should be kept bright and clean to ensure stable operation function for a long time. At the same time, it is necessary to regularly clean the ground to ensure that the drainage equipment around the cleaning machine is unobstructed and avoid water accumulation that may affect the equipment.

3. Although the cleaning solution can be recycled after filtration, it is still necessary to replace it with a new solution in a timely manner after a period of use, and completely clean the cylinder body of the laboratory ultrasonic cleaning machine to avoid corrosion of the cylinder bottom caused by sediment and perforation leakage.

4. If the laboratory ultrasonic cleaning machine is used for a long period of time, the cleaning solution in the cylinder should be discharged in a timely manner and the cleaning agent should be wiped clean when not in use. At the same time, it should be packaged with plastic film for maintenance, and the environment should be well ventilated to prevent water vapor dust from passing through the ultrasonic generator.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/