1、 Perforation problem of oscillating surface

The oscillation surface in medical ultrasound cleaning machines is connected to transducers to generate large-area ultrasound waves. When the cleaning machine is overloaded for a long time and damages the oscillation surface, perforation of the oscillation surface will occur after a certain period of use. Moreover, the perforation of the stainless steel oscillation surface cannot be reversed and corrected, and generally only the entire machine can be replaced.

2、 Ultrasonic oscillator moisture problem

When using a medical ultrasonic cleaning machine, it is necessary to add a cleaning solution. If the solution is not cleaned in a timely manner after the cleaning is completed, it is easy for the ultrasonic transducer to become damp. In addition, if the surrounding environment of the ultrasonic cleaning machine is damp, it can also cause this situation. When the transducer is damp, it will affect the current and resistance value, and the effectiveness of cleaning medical equipment will be greatly reduced. The transducer can be removed for manual drying treatment, but it is important to remove the spray coated shell.

3、 Ultrasonic oscillator delamination

The oscillator of a high-quality medical ultrasonic cleaning machine is fixed with screws and glue, so there may not be any abnormalities in the current when it comes to detachment. However, if there is a problem with the fixing, the oscillator may collide with the oscillating surface, which is also one of the reasons for the damage of the oscillating surface. Therefore, it is necessary to pay attention to touching the oscillator to see if it is stable. If it feels loose, it should be repaired properly.

As far as I know, you need to obtain a business license for medical equipment, which would cost over a million yuan. The details depend on the medical application you are using, and some medical equipment does not require certification.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/