How to use ultrasonic cleaning machine method process:

1. Place the items that need to be cleaned into the cleaning basket of the cleaning machine, and then place the cleaning basket into the cleaning tank. Do not directly place the items into the cleaning tank to avoid damaging the equipment and cleaning effect.

2. According to different products and cleaning effects, pour cleaning solution, water or aqueous solution in proportion, with a minimum water level of 60mm and a maximum water level of 80mm.

3. Connect to a 220V/50Hz power three pin socket and turn on the power.

4. Turn on the switch button of the ultrasonic cleaning machine, the green switch lights up and shows normal operation.

5. According to the cleaning requirements of the item, turn on the temperature control of the ultrasonic cleaning machine for temperature adjustment.

6. When the temperature indicator light goes out and the heater reaches the required level, the heater will stop working. If the temperature is lower than the set temperature, the heater will continue to actively heat.

When the heating temperature reaches the product cleaning requirements, the cleaning timer can be turned on, and the working time of the timer can be set according to the product cleaning requirements.

8. Generally, cleaning items takes 10 to 20 minutes. For workpieces that are difficult to clean, the cleaning time can be appropriately extended to ensure the cleaning effect.

9. The timer position can be adjusted arbitrarily within 1-20min, or it can be adjusted to the normally on position. Generally, cleaning takes 10-20 minutes. For parts that are particularly difficult to clean, the cleaning time can be appropriately extended.

10. After cleaning, take out the cleaning basket from the cleaning tank and wash it with warm water or rinse it in another solvent-free warm water cleaning tank.

11. After cleaning, the items should be dried, stored, and assembled.

Article source: Kaiping ultrasonic cleaning machine http://www.kpzfcsb.com/