Oil Removal Ultrasonic Cleaning Machine Device in Kaiping City

Ultrasonic cleaning machines are used in the processing of jade and ornaments: During the grinding and polishing process, many dust and dirt will adhere to the jade and ornaments, and these workpieces often have messy shapes and many gaps. Traditional cleaning methods are often at a loss, while Weigu Te ultrasonic cleaning machines have unique effects. 5、 Ultrasonic cleaning machine is used for hanging clocks and instruments: With ultrasonic cleaning machine, hanging clocks and instruments no longer need to disassemble screws, gears, balance springs, watch chains, etc. one by one,

According to different raw materials, there are three types: 201 stainless steel, 304 stainless steel, and 316 stainless steel. Among them, the cleaning machine for 304 stainless steel cleaning tank is very common. The cleaning tank for this type of raw material is a good conductor of ultrasonic waves, and has certain acid and alkali resistance, strong heat resistance, strong corrosion resistance in the atmosphere, good formability, and easy welding and stretching. The cleaning tank for 316 stainless steel raw materials is mostly used for ultrasonic cleaning equipment with higher hygiene levels. This type of cleaning tank has stronger corrosion resistance and acid and alkali resistance. Like 304 stainless steel, it has good formability, weldability, and stretchability, which meets GMP equipment standards.

The formation of a sound wave barrier makes it difficult for sound waves to propagate into liquid space. In areas far from the sound source, the intensity of sound waves will weaken quickly and cannot constitute effective cleaning. The higher the power density of ultrasound, the stronger the cavitation effect, and the better its cleaning effect. For parts with severe external dirt, messy shapes, and deep holes and blind holes, a higher power density should be selected. A frequency of 20-50Khz and an ultrasonic energy density of 2-3W/cm2 are better; In general, the power density of ultrasonic cleaning machines is set at 0.5-1W/cm2. Selection method of cleaning solution for ultrasonic cleaning machine

Kaiping City Oil Removal Ultrasonic Cleaning Machine Device, ① Check if the rectifier bridge is damaged. The method is to set the pointer multimeter to the × 10k gear, connect the black probe to the rectifier bridge, and separate the red probe from the AC terminal to check if the two pins are conductive. If so, check the next step; ② Check if the main capacitor is damaged, if so, replace the battery; ③ Check if the power transistor is damaged. The method is to set the pointer multimeter to the × 10k gear, connect the black probe to pin 2 of the power transistor, and disconnect the red probe from pins 1 and 3 to check if they are conductive. If they are, replace the power transistor. Otherwise, restore the working condition. 2、 No ultrasound,

It is necessary to use a frequency of 68KHz for backend rinsing to avoid ultrasonic damage to the workpiece. The single slot ultrasonic cleaning machine has the following advantages: 1. It uses NTK ultrasonic oscillators imported from Japan, strictly controls the quality, and ensures that every quality meets the requirements, serving customers. 2. The layout of the ultrasonic oscillator is simulated through rigorous calculations, and the layout of the ultrasonic oscillator is reasonably distributed to achieve a reasonable arrangement and good performance. 3. Planting nails to bond the oscillator with the steel plate is a recognized practice by ultrasonic companies.

The ultrasonic cleaning machine device for oil removal in Kaiping City also has the function of killing diseases. The application of ultrasound in the micro powder industry: As is well known, to obtain particles of different sizes, crushed materials are ground in a ball mill and sieved layer by layer through different specifications of sieves. After long-term use, the sieve holes will be blocked (such as diamond sieve), and other methods of scrubbing will damage the sieve, and the effect is not satisfactory. After experiments from many manufacturers, using an ultrasonic cleaning machine not only does not damage the sieve, but also completely recovers the blocked particles on the sieve.

Article source: Kaiping ultrasonic cleaning machine www.kpzfcsb.com/