What should I do if the ultrasonic cleaning machine stops working and how can I repair it? During the use of the ultrasonic cleaning machine, there may be some issues that can be easily cleaned by oneself. If it is really broken, it can only be sent back to the original factory for repair. So how should customers clean ultrasonic cleaning machines?

The first thing to check is whether the power supply is connected. Many customers think that the machine is not working and cannot be turned on because they have not connected the power supply properly. However, under the guidance of our technical personnel, it has been resolved. According to our calculations, over 60% of non boot issues are caused by poor power connection. Checking the power supply is very simple. You can plug other appliances into the original socket to see if they can work. If not, it is clear that the power supply is not connected properly.

Some machines suddenly stop working after a period of use, and the power indicator light no longer lights up. If the light still doesn't light up after cleaning the power supply, you can unplug the machine's fuse to check, or replace it directly. Most models of Dawei ultrasonic cleaning machines come with backup fuses, which can be easily replaced. Attention: Please perform this operation after disconnecting the power supply.

After plugging in the power supply, the machine can be turned on and the indicator light can be on, but there is no sensation in the liquid in the cleaning tank. Assuming it is mechanically controlled, you can check whether the knob switch controlling the ultrasonic wave is turned on or adjusted to the time position. The CNC ultrasonic cleaning machine needs to be checked whether it has been set according to the initial and timely settings. After cleaning both items, it can be determined that there is a problem with the internal components of the machine, and it can be sent to the factory for repair. Assuming the customer has some experience in electronic repair, they can also remove it themselves and identify the problem area.

After checking that there are no issues with the heating switch, send it to the factory for repair or take photos for startup inspection, and have the company assist in handling it.

The probability of problems with ultrasonic cleaning machines is relatively small, and most of them can be easily handled by themselves. When problems occur, careful investigation is necessary, and one should not be too nervous. Assuming we truly don't understand, I hope we don't blindly fix it. We need to hire professional operators to fix it.

Article source: Kaiping ultrasonic cleaning machine http://www.kpzfcsb.com/