The precautions for using ultrasonic cleaning machines for cleaning should be strictly followed. In addition, professionals remind everyone to unplug the power supply in a timely manner after use to avoid weakening the service life of the ultrasonic cleaning machine due to the internal weak current passing through it for a long time. It is important to note that the operating time should not be too long. Generally, the limit is eight hours, and after eight hours, indirect operation is required to avoid temperature dispersion and deterioration, which may cause low operating efficiency or damage to the equipment. The following is an introduction to the precautions to be strictly followed when using this type of cleaning machine using ultrasonic waves.

Firstly, be careful not to exceed the temperature limit

It is easy to ignore the application temperature of the cleaning agent when using an ultrasonic cleaning machine. Most acid-base cleaning agents have strict requirements for the operating temperature, and when the temperature of the cleaning agent itself exceeds 50 to 60 degrees Celsius, the cleaning effect will be severely reduced. However, excessive temperature of cleaning agents may also pose risks, so this should be particularly noted.

Secondly, pay attention to the low liquid level

Because highly rated ultrasonic cleaning machines are high-precision instruments under high technology, a series of preparation tasks need to be done when using them. The condition for ensuring the safe operation of the equipment is that the liquid level in the tank is appropriate. If the liquid level is found to be too low, it is necessary to increase the cleaning solution in a timely manner. If the power supply is registered without a liquid level or with a low liquid level, it is very easy to damage the equipment.

Then pay attention to the high-frequency wire hole and ensure there are no impurities near it

Before using the ultrasonic cleaning machine, it is necessary to ensure that there are no other small particles or impurities around the cleaning machine to avoid entering the high-frequency wire holes and other precision parts during the operation of the ultrasonic cleaning machine. Special items can also be cleaned with distilled water before using professional cleaning agents to stop cleaning.

Next, be careful not to use highly evaporative solvents

Generally, reliable ultrasonic cleaning machines require the use of special cleaning agents, but it is important to ensure that the cleaning agents have no or weak evaporation. Because the evaporation of acidic and alkaline cleaning agents can have a fatal impact on the cleaning machine, and usually evaporative solvents acting inside the equipment can reduce the efficiency of the cleaning machine and decrease the sound pressure generated.

Jiangmen Zhengfei Ultrasonic Equipment Co., Ltd. is an enterprise engaged in the research and development, consumption, and sales of ultrasonic cleaning machines, with engineers and technicians who have been engaged in ultrasonic cleaning equipment for many years.

Article source: Jiangmen Ultrasonic Cleaning Machine http://www.kpzfcsb.com/